husqvarna sewing machine dealer

husqvarna sewing machine dealer in Special Thanks

husqvarna sewing machine dealer Special Thanks

husqvarna sewing machine dealer Special Thanks.A viking 6430 sewing machine we recently bought over the internet will not feed material to be sewn.
The dog feet rotate properly but continue to fall down and will not grip the material.
I partially dismantled the unit and all seems to be in place, including the spring forcing the feet up.
Anyone have a maintenance manual with info?
Take off the first and check to see if there is a build up of lint stopping the getting above the plate.
Also check that the plate is flat, if not you may need to replace.
If there is no lint try this, set the stitch length to zero.
Turn the handwheel and you should see the feed dog rising above the plate just as the needle starts to go above the plate.
The feed dog should be just below the plate as the needle enters the needle plate on the way down.
Some machines have a darning function to stop the feed dog rising and some also have an adjustment switch to set the height for thicker fabrics.
Also check that the presser foot is coming all the way down with no space between it and the plate when the needle is down.
Are precision machines and adjustments are made in thousands of an inch, a full service usually only costs about 50 to 75 without parts and you would need to find a machine dealer to get the proper service.
Best of luck, let me know if it works, cheers, joe
Ï»¿ twist the handwheel and you should witness the provender dog rising above the plate just as the needle starts to go above the plate.
The feed dog should be merely below the home equally the needle enters the needle home on the way down.
Ï»¿ the feed dog should be merely below the home equally the needle enters the needle home on the way down.. husqvarna sewing machine dealer

Viking Husqvarna #1 / 1... (4:05:10)
4,374 views
"From 1991 / late 1990 One Singular Sewing Sensation The New Viking Husqvarna #1 Sewin..."